MODEL SEPP 35
On the SEPP-35 the stand is standard, but can be removed for a table top model. It offers dependable performance for your punching needs with optional capabilities in the areas of shearing or forming for those special jobs. The SEPP-35 offers an electric foot control and high cycle speeds.
Standard Features:
- Complete Punching Attachment with stripper
- Electric Punch End Control including
- Remote Foot Switch & Limit
- Coupling Wrench & 3/8″ Allen Wrench
- Intergral Lifting Lug for instant portability
- Extra Oil Filter
- Stand
MODEL SEPP 65
The SEPP-65 offers dependable performance for your punching needs with optional capabilities in the areas of shearing of forming. A large platen and open throat accommodates a wide variety of tooling.
Standard Features:
- Complete Punching Attachment with stripper
- Electric Punch End Control including
- Remote Foot Switch & Limit
- Coupling Wrench & 3/8″ Allen Wrench
- Intergral Lifting Lug for instant portability
- Extra Oil Filter
- Chip Bucket
MODEL SEPP 88
The SEPP-88 offers a high-tonnage punch with seven inches of true vertical stroke adaptable to an unlimited variety of special applications. Optional capabilities exist in the areas of shearing and forming. Smooth, precise operation is achieved with a remote foot switch and limit switch stroke control.
Standard Features:
- Complete Punching Attachment with stripper
- Electric Punch End Control including
- Remote Foot Switch & Limit
- Coupling Wrench & 3/8″ Allen Wrench
- Intergral Lifting Lug for instant portability
- Extra Oil Filter
- Chip Bucket
MODEL SEP 120
The SEP-120 is the most cost effective 120 ton single end punch manufactured in America. The machine features a 21.5″ throat that allows the use of a wide range of tooling and accessories.
Standard Features:
- Complete Punching Attachment with stripper
- Electric Limit Switches for stroke control
- 10 Punch and Die set
- 5 Position joy stick control (electric) with jog up & down,fast up & down, neutral
- Remote Electric Foot Switch
- Coupling Wrench
- Integral Lifting Lug for instant portability
- Extra Oil Filter
- Remote Reservoir and Power Unit
MODEL SEP 140
- Punching Capacity 140 tons; 1-3/4″ dia. thru 1″ or 1-3/8″ thru 1-1/4″ 5″ thru 5/16″ (with special tooling)
- Punch Throat Depth 20.5″
- Open Height 14″
- Punch Stroke 7″
- Foot Switch Control Allows for hands free operation
- Bending 140 tons (Optional Bending Attachments Available)
- Hydraulic Unit 20 HP; 230/460 volt, 3 phase 60 cycle motor 15 GPM Pump; 45 gallon reservoir (approx.)
- Dimensions 93″ x 51″ x 85″
- Weight Approx. 7,800 lbs.